PGP Project

NOTE: 5 April 2006

There is a problem with the conversion. Seems the cocking arm is to short There are issues,so it's on the way back to mark for refit. It was really nice work. We will get this done and have it ready to play.

Started off with a regular 2k PGP. The goal was to turn it into a semi. It started off rough,but with the help of Mark's customs it can out fine.

Removing it wasn't very hard. I just used a tourch. The picture is of another PGP. I didn't take one as I took off the top tube. The pic is more for effect.

I chose the Sovergin frame because of the out side 3 way. I really didn't want to mess with an internal 3 way. Plus this will make it different for a while. That's until Rainman 229 starts to put these out as a regular upgrade.

I went with a sonic LPR. They are very small and fit perfect in the lower tube.

When I build a gun I really research parts and people. I chose this Ram because of the shaft. It was new on the market at the time. The Rams that PPS use have the same shaft diameter. Not sure about the throw. How ever I took the chance . I read that normal cocker rams do have issues as they wear.

The body had already been Powder coated,Feed soldere and special mount made for the Ram. But he wasn't happy with the work. Marc decided he was going to experiment a little.